Canada
Gasket for Window Operator (Truth Hardware ‘Maxim’ 31882)
$3.50
Related products
Close
Window Crank Handle Extension (Truth Hardware 40097) (4 inches)
Fits all Truth crank handles (5/16" or 11/32" spline size). Usable on any Truth operator.
Close
Crank T-Handle (Truth Hardware 11573) (5/16″ Spline)
Material: Die Cast
Used with Truth Hardware operators.
Also known as a Butterfly Handle this style of crank handle has a very low profile to keep the window operator from interfering with window coverings like venetian blinds.
Close
ADA Window Crank Handle (Truth Hardware 5/16″ Spindle 11403)
Material: Die Cast
This operator handle has a larger diameter knob end and longer contour shape to make it easier for a person with limited mobility to crank open or close a casement or awning style window.
Fits all Truth Hardware roto crank style casement and awning operators.
ADA (Americans with Disabilities Act)
For use on any geared or crank style Truth window or door operator (5/6 in. spline or spindle size).
Also known as an 11/32 in. spline or spindle size.
Operator Cover (Contour) (Truth Hardware 11553)
Truth Hardware part number: 11553.32
Operator Cover & Folding Handle (Truth Hardware ‘Entrygard’ 12905)
Material: Die Cast
Contour Handle and Cover for the Entrygard Operators.
Available in many different finishes. Electrostatically applied, durable coatings that provide excellent resistance to chipping, scratching and corrosion while maintaining colour stability for years in direct sunlight.
Close
Operator Cover (Folding Handle) (Truth Hardware 41212)(Right)
Hand: Right
Truth Hardware part number: 41212.32
Close
Entrygard Operator Cover (Truth Hardware 10341)
These covers are used on many Truth Hardware cranks and are mounted by clipping them on. The crank handle needs to come off to remove the cover plate.
Close
Crank Handle (Contour) (Truth Hardware 11454) (5/16″ Spline)
Material: Die Cast
For use on any geared or crank style Truth window or door operator (5/6 in. spline or spindle size - also known as an 11/32 in. spline or spindle size).
This crank handle is a snap-on style handle. It doesn't have a set screw, but two springs instead. It can be easily removed by pulling.